Metrologic Instruments MS7320 - Manual (Page 38)

34
D
ESIGN
S
PECIFICATIONS
MS7320 S ERIES D ESIGN S PECIFICATIONS
O PERATIONAL
Light Source: Visible Laser Diode (VLD) @ 650 nm
Laser Power: 0.678 mW (peak)
Depth of Field:
0 mm to 215 mm (0"- 8.5") for
0.33 mm (13 mil) bar code
Width of Scan Field:
38 mm (1.5") @ 15 mm (0.6");
135 mm (5.3") @ 191 mm (7.5")
Scan Speed: 2000 scans/second
Scan Pattern: 5 fields of 4 parallel lines (omnidirectional)
Scan Lines: 20
Min Bar Width: 0.127 mm (5.0 mil)
Decode Capability:
Autodiscriminates all standard bar codes; for other
symbologies call Metrologic
System Interfaces:
PC Keyboard Wedge, RS232, OCIA, Light Pen,
Stand Alone PC Keyboard, USB, IBM 468x/469x
Print Contrast: 35% minimum reflectance difference
No. Characters Read:
up to 80 data characters (Maximum number will vary
based on symbology and density)
Roll, Pitch, Yaw: 360°, 60°, 60°
Beeper Operation: 7 tones or no beep
Indicators (LED):
green = laser on, ready to scan
red = good read, decoding
M ECHANICAL
Dimensions:
185 mm (7.3") H, 99 mm (3.9") D,
168 mm (6.6") W
Footprint of Stand 64 mm (2.5") x 64 mm (2.5")
Weight: 1.2 Kg (2.65 lbs)
Termination: Three 10-pin modular RJ45 jacks
Cable:
Standard 2.1m (7') straight; for other cables call
Metrologic
Specifications are subject to change without notice.