Metrologic Instruments MS7320 - Manual (Page 44)

40
D
EFAULT
S
ETTINGS
Many functions of the scanner can be "configured" - that is, enabled or disabled.
The scanner is shipped from the factory configured to a set of default conditions.
The default parameter of the scanner has an asterisk ( * ) in the charts on the
following pages. If an asterisk is not in the default column then the default setting
is Off or Disabled. Every communication does not support every parameter. If
the communication supports a parameter listed in the charts on the following
pages, a check mark ( ) will appear.
P ARAMETER D EFAULT OCIA RS232
L IGHT
P EN
IBM
46XX
KBW USB
UPC/EAN
*
Code 128 *
Code 93
*
Codabar *
Interleaved 2 of 5 (ITF)
*
MOD 10 Check on ITF
Code 11
Code 39
*
Full ASCII Code 39
MOD 43 Check on
Code 39
MSI-Plessey
Airline (15 Digit) 2 of 5
Airline (13 Digit) 2 of 5
Matrix 2 of 5
Telepen
UK Plessey
STD 2 of 5
MSI-Plessey 10/10 Check Digit
MSI-Plessey MOD 10 Check
Digit
*
Paraf Support
ITF Symbol Lengths Variable
Minimum Symbol Length 4
Symbol Length Lock None
Bars High as Code 39
*