Metrologic Instruments MS7320 - Manual (Page 32)

28
EAS D
EACTIVATION
A
NTENNA
SW1 and SW2 are the switch banks inside the Checkpoint Device that set the
deactivation range. Metrologic recommends end users program the MS7320 to
the Fixed for Low Density Codes - Depth of Field*, so that the unit does not scan
out beyond the deactivation range.
Unit #
Checkpoint Recommended
Switch Bank Settings
MS7320 Depth of Field
Recommended Settings
MS7320
SW1 - 2, 3, 4, 5, 6 set to ON &
SW2 - 2, 3, 4, 5, 6 set to ON
Fixed for Low Density Codes
Depth of Field Adjustments*
³ 4 1 8 7 2 0
* Note: Minimum element width changes to 6.8 mil when in this mode.
Figure 30: EAS Deactivation Antenna
Contact Checkpoint Systems directly for additional EAS support.