Milan Technology MIL-W0311 - Manual (Page 22)

Configuration
19
Existing Stations
• This lists the Wireless stations you have entered. If you have not
entered any stations, this list will be empty.
• To delete an entry, select it, and click the "Delete" button. Multiple
entries may be selected by hold down the CTRL key while select-
ing. (On the Macintosh, use SHIFT instead of CTRL.)
New station
Address
• Use this field to add a new station to the list. Just enter its address
here, and click the "Add" button.
• Use the software supplied with your Wireless unit to determine its
address. The address consists of 12 letters (A..F) and digits (0..9)
like this example:
10F810A81091
The address may be shown with separators ( : or - ) between each
pair of characters.
Do NOT enter the separators ( : or - ) in this field.
Access
Permission • For Wireless Stations listed above
This setting determines what type of access is available to Wireless
stations whose address has been entered in the "Wireless Stations"
list.
• For Other Wireless Stations
This setting determines what type of access is available to Wireless
stations whose address is NOT in the "Wireless Stations" list.
• For either category, if neither "Internet" nor "LAN" access is
enabled, Wireless stations are unable to use this Access Point.
Buttons
Delete Delete will delete the selected entry or entries in the list.
Add Add will add the New Station data to the list.
Save Save will save the other data on the screen. This has no effect on the
contents of the Wireless Stations list.