Milan Technology MIL-W0311 - Manual (Page 83)

Wireless Gateway User Guide
80
Filters Screen
The Filters screen is reached from the Access Control link on the navigation bar. An example
screen is shown below.
Figure 37: Filters Screen
This screen allows you to define packet filters. When you define security groups, on the "Secu-
rity Groups" screen, you can select from any filters defined here, as well as the pre-defined
filters.
Data – Filters Screen
Define the packets you wish to be filtered out, by entering the following data.
TCP Filters
Name Enter a descriptive name for this entry.
Port No. Enter an integer representing the Port Number for this type of packet. This
information can normally be provided by the service provider. Otherwise, a
Network Analyzer or Packet Sniffer can be used to determine the correct port
number.
UDP Filters
Name Enter a descriptive name for this entry.
Port No. Enter an integer representing the Port Number for this type of packet. This
information can normally be provided by the service provider. Otherwise, a
Network Analyzer or Packet Sniffer can be used to determine the correct port
number.