Milan Technology MIL-W0311 User Manual

Page 55

Advertising
background image

Wireless Gateway User Guide

52

Physical Link

If operating, the link will show ON. This means the modem was able to
connect to the number dialed.

PPP Link

If ON, a PPP connection was successfully negotiated.

PPP IP Address

This has 2 possible meanings, depending of the type of connection:

Internet Access - This is the IP Address used by this device, as

seen by Internet users. This address is provided by your ISP.

Dial-in - This is the IP Address used by the remote user. This IP

Address is allocated by the DHCP Server function in the Wireless
Gateway.

User

There are 2 possibilities:

For Internet Access, this shows the Internet Account name.

For Dial-in operations, this shows the current user.

Phone Line
Speed

The connection speed over the phone line, between your modem and
the number dialed, as reported by your modem.

Serial Line
Speed

The connection speed between this device and the modem. This setting
can be changed on the Serial Port screen.

Log

Connection Log

This displays connection details.

See below for a description of the most common items in this log.

Connection Log

This shows the commands sent to the modem, and any status messages returned by the modem.
Note that you must click Refresh to update the information.

The following table lists the common messages, and their meaning.

Message

Description

Dialing

Dialing the ISP

Try to establish
physical connection.

The device is trying to connect with the ISP, using the modem.

Busy

The number dialed was busy.

Physical line is
connected

Physical connection to ISP has been established.

CONNECT nnnnnn

Physical connection was successful; nnnnnn indicates the speed of
the serial link as currently configured.

Max phone line speed
nnnnnn bps

nnnnnn is the maximum speed of the modem, according to the
current configuration.

DCD low,
DSR low

Physical line break, connection lost.

send "-----"
wait "-----"

"AT" commands sent to the modem are displayed as they are sent.
Commands in the Script file are also displayed as they are executed.

Advertising
This manual is related to the following products: