Milan Technology MIL-W0311 User Manual
Page 56
Serial Port
53
Start PPP
Having established a physical connection, a PPP connection is now
being established.
PPP up fail
The PPP connection could not be established.
PPP up successfully
The PPP connection was established successfully.
Stop PPP
The PPP connection was terminated. This will occur at the end of a
session, or an error condition.
Try to hang up
Attempting to get the modem to hang up.
Time out
There was no response from the modem
No carrier
No answer
The number dialed did not answer.
Idle timer expires
"Disconnect after Idle Time" is Enabled, and the Time-out period
has been reached. The connection will now be terminated..
No dial tone
The modem could not obtain a dial tone.
Set baudrate nnnn
The serial line speed is being set to the speed set in the configura-
tion.