Milan Technology MIL-W0311 - Manual (Page 33)

Wireless Gateway User Guide
30
Printing Setup
The Wireless Gateway provides printing support for 2 methods of printing from Windows:
• Print Port Driver. After installing the Print Port Driver, Windows users can print directly
to the Wireless Gateway. Print jobs are spooled (queued) on each PC.
The supplied Print Port Driver supports Windows 95/98, Windows ME, Windows NT4.0,
and Windows 2000.
• LPD/LPR Printing. If using Windows NT 4.0 Server or Windows 2000 Server,
LPD/LPR printing can be used. No software needs to be installed on either the Windows
Server or each client PC. Print jobs will be spooled (queued) on the Windows Server, and
can be managed using the standard Windows Server tools.
Print Port Driver Setup
The following procedure is for Windows 95/98, Windows ME, Windows NT4.0, and Windows
2000.
1. Insert the supplied CD-ROM into your drive. If the setup program does not start automati-
cally, run SETUP.EXE in the root folder.
2. At the Setup Type screen, select the correct model.
3. At the Select Components screen, select the Print Port Driver option.
4. Follow the prompts to complete the installation.
5. The Print Port Setup will then run, and the following screen will be displayed.
Figure 14: Print Port Setup
6. Select the desired device and port, and then click the "Add" button.