Milan Technology MIL-W0311 - Manual (Page 53)

Wireless Gateway User Guide
50
Dial-in
Enable dial-in access Use this to suspend or enable dial-in access.
This setting can also be changed on the Dial-in Users screen.
Enforce connection
time limit If checked, the Wireless Gateway will terminate the Dial-in
connection after the specified period. The time period can be set
from 1 to 999 minutes.
If unchecked, the connection time-out set on the Serial Port
screen will be used. If neither time-out is enabled, the connection
must be terminated by the remote user.
Call back Select the desired option:
• Disabled:- The user can simply dial-in; the Wireless Gateway
will not hang-up and call back.
• Roaming:- After providing their name and password, the user
is prompted for the call-back number. The Wireless Gateway
will then hang up and dial the number provided by the remote
user.
• Fixed:- The number entered in the Telephone No. field is
always used as the call-back number. The Wireless Gateway
will accept the incoming call, authenticate the user, then hang
up and dial this number.
• Telephone No:- If Fixed is chosen, a telephone number must
be entered in this field. For the other options, this field is ig-
nored.