Milan Technology MIL-W0311 - Manual (Page 20)

Configuration
17
Wireless Screen
The Wireless Access Point settings must match the other Wireless stations. To change the
Wireless Gateway's default settings for the Wireless Access Point, use the Wireless link on the
main menu to reach the Wireless screen. An example screen is shown below.
Figure 6: Wireless Screen
Data – Wireless Screen
Configuration
Regulatory
Domain It is illegal to use this device in any location outside of the regulatory
domain.
Station name This is the same as the Device (Host) Name on the WAN screen. On
your PC, some Wireless status screens may display this name as the
Access Point in use.