Microsoft PRO 906EX - Manual (Page 157)

Copier/Document Server Features on Main and Sub-machines
149
4
Edit
How the defaults in the Edit of copying of the main and sub-machines are used
in combined copying will be explained.
❖ Front Margin: Left/Right
• The main machine follows the values that are set in it. The sub-machines
follows the settings made on the main machine, regardless of the settings
made in it.
• The operation takes place using the set values of the main machine.
❖ Back Margin: Left/Right
• The main machine follows the values that are set in it. The sub-machines
follows the settings made on the main machine, regardless of the settings
made in it.
• The operation takes place using the set values of the main machine.
❖ Front Margin: Top/Bottom
• The main machine follows the values that are set in it. The sub-machines
follows the settings made on the main machine, regardless of the settings
made in it.
• The operation takes place using the set values of the main machine.
❖ Back Margin: Top/Bottom
• The main machine follows the values that are set in it. The sub-machines
follows the settings made on the main machine, regardless of the settings
made in it.
• The operation takes place using the set values of the main machine.
❖ 1 Sided → 2 Sided Auto Margin: TtoT
• The main machine follows the values that are set in it. The sub-machines
follows the settings made on the main machine, regardless of the settings
made in it.
• The operation takes place using the set values of the main machine.
❖ 1 Sided → 2 Sided Auto Margin: TtoB
• The main machine follows the values that are set in it. The sub-machines
follows the settings made on the main machine, regardless of the settings
made in it.
• The operation takes place using the set values of the main machine.
❖ Creep Setting for Magazine
• The main machine follows the values that are set in it. The set values of the
sub-machines do not affect the combined copying.