Microsoft PRO 906EX - Manual (Page 83)

Administrator Tools
75
2
❖ Program / Change / Delete LDAP Server
Program the LDAP server to find up e-mail destinations in the LDAP server
Address Book directly. This function is possible when sending scan files by e-
mail using the scanner.
• Name
• Server Name
• Search Base
• Port Number
• Use Secure Connection (SSL)
• Authentication
• Search Conditions
• Search Options
To start an LDAP search, make sure that the items listed below are set. For
other items, check your environment and make any necessary changes.
• Server Name
• Search Base
• Port Number
• Search Conditions
• Authentication method selection
To use the LDAP server in Administrator Tools, select [On] under LDAP server.
This function supports LDAP Version 2.0 and 3.0. Ver 2.0 does not support
High Security authentication.
• Program/Change
A Press [System Settings].
B Press [Administrator Tools], and then press [TNext] twice.
C Press [Program/Change/Delete LDAP Server].
D Select the LDAP server you want to program or change.
When programming the server, select [Not Programmed].
E Set each item as necessary.
F Press [OK] after setting each item.
G Press [Exit] twice.
H Press the {User Tools} key.