Microsoft PRO 906EX - Manual (Page 38)

Connecting the Machine
30
1
IEEE 802.11b (wireless LAN)
This section describes necessary set items for using network TWAIN Scanner
with IEEE 802.11b (wireless LAN).
For details about specifying the settings, see "Interface Settings" and "File Transfer".
Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b)
are connected, the selected interface takes precedence.
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
Heading Setting Item Setting Requirements
interface settings/Network Machine IPv4 Address Mandatory
interface settings/Network IPv4 Gateway Address As required
interface settings/Network DNS Configuration As required
interface settings/Network DDNS Configuration As required
interface settings/Network Domain Name As required
interface settings/Network WINS Configuration As required
interface settings/Network Effective Protocol Mandatory
interface settings/Network LAN Type Mandatory
interface settings/Network Permit SNMPv3 Communication As required
interface settings/Network Permit SSL/TLS Communication As required
interface settings/Network Host Name As required
interface settings/
IEEE 802.11b Communication Mode Mandatory
interface settings/
IEEE 802.11b SSID Setting As required
interface settings/
IEEE 802.11b Channel As required
interface settings/
IEEE 802.11b Security Method As required
interface settings/
IEEE 802.11b Transmission Speed As required