Microsoft PRO 906EX - Manual (Page 63)

Interface Settings
55
2
❖ LAN Type
When you have installed the optional IEEE 802.11b interface unit, select inter-
face, IEEE 802.11b (wireless LAN) or Ethernet.
• Ethernet
• IEEE 802.11b
Appears when the optional IEEE 802.11b interface unit is installed.
If Ethernet and IEEE 802.11b (wireless LAN) are both connected to the ma-
chine, the selected interface takes precedence.
❖ Ping Command
Check the network connection with ping command using given IP address.
If you fail to connect to the network, check the following, and then retry the
ping command.
• Check TCP/IP of the printer is active.
• Check that the machine with assigned IP address is connected to the net-
work.
• There is a possibility that same IP address is used for the specified equip-
ment.
❖ Permit SNMPv3 Communication
Set the encrypted communication of SNMPv3.
• Encryption Only
• Encryption/Clear Text
If you set to [Encryption Only], you need to set password for the machine.
❖ Permit SSL/TLS Communication
Set the encrypted communication of SSL/TLS.
• Ciphertext Only
• Ciphertext Priority
• Ciphertext/Clear Text
If you set to [Ciphertext Only], you need to install the server authentification for
the machine.
❖ Host Name
Specify the host name.
Enter the host name using up to 63 alphanumerical characters.
❖ Machine Name
Specify the machine name.
Enter the machine name using up to 31 alphanumerical characters.