Microsoft PRO 906EX - Manual (Page 18)

Connecting the Machine
10
1
Connecting to the IEEE 1394 Interface
Connect the IEEE 1394 interface cable to the IEEE 1394 interface board (optional).
A
Connect the IEEE 1394 interface cable to the IEEE 1394 port.
B
For IEEE 1394 (SCSI print) connection, plug the other end of the cable into
the interface connector on the host computer.
Make sure about the shape of the connector to the computer. Fasten the con-
nector securely to the computer.
Note
❒ Use the interface cable supplied with the IEEE 1394 interface board (op-
tional).
❒ Make sure the interface cable is not looped.
❒ Two interface ports are available for connecting the IEEE 1394 interface ca-
ble. Either is suitable.
❒ For details about installing the printer driver, see "Preparing the Machine"
Printer Reference
Reference
"Turning On the Power" About this machine
"Preparing the Machine" Printer Reference