Timer settings, 2timer settings – Microsoft PRO 906EX User Manual
Page 57
Timer Settings
49
2
Timer Settings
This section describes various items of [Timer Settings] under [System Settings].
❖ Auto Off Timer
After a specified period has passed, following job completion, the machine
automatically turns off, in order to conserve energy. This function is called
"Auto Off". The machine status after the Auto Off operation is referred to as
"Off mode", or "Sleep mode". For the Auto Off Timer, specify the time to
elapse before Auto Off.
The timing is set to "90 minute(s)" (Type 2, 3: 120 minute(s)) by default.
The time can be set from 10 seconds to 240 minutes, using the number keys.
Auto Off may not work when error messages appear.
❖ Energy Saver Timer
Set the amount of time the machine waits before switching to lower-power
mode after copying has finished or the last operation is performed.
The time can be set from 1 to 240 minutes, using the number keys.
The timing is set to "15 minute(s)" by default.
❖ Panel Off Timer
Set the amount of time the machine waits before switching the panel off after
copying has finished or the last operation is performed.
The warm up time for making a copy from standby mode is 10 seconds.
Enter a time interval between 10 seconds and 240 minutes, using the number
keys.
The timing is set to "1 minute(s)" by default.
❖ System Auto Reset Timer
The System Reset setting automatically switches the screen to that of the func-
tion set in Function Priority when no operations are in progress, or when an
interrupted job is cleared. This setting determines the system reset interval.
• On
• Off
The time can be set from 10 to 999 seconds, using the number keys
The timing is set to "60 second(s)" by default.
❖ Copier/Document Server Auto Reset Timer (copier/Document Server)
Specifies the time to elapse before copier and Document Server modes reset.
• On
• Off
If [Off] is selected, the machine does not automatically switch to the user code
entry screen.
The time can be set from 10 to 999 seconds, using the number keys.
The timing is set to "60 second(s)" by default.