Moyer Diebel MD1000HT - Manual (Page 21)

15
_____________ Installation Guide
;
Initial Start-up MD-1000HT
MD-1000HT • Initial Start-up
Caution:
DO NOT flip the dishwasher power switch "ON"
until you read the instructions below.
Continued on page 16
1. The built-in stainless steel electric booster
was shipped without water.
2. A manilla card located above the power
switch explains how to turn the machine
on for the first time.
See step No. 10 on the next page for the first
DISHWASHER POWER UP procedure.
Let's begin the Initial Start-up:
1. Check the placement of the dishwasher:
; Compare the machine location with the
building plan or consult the owner or
the General Contractor for approval.
; Check that the dishwasher configuration
straight-through or corner operation
is correct (See page 2 for details).
2. Check that all options and/or accessories
are installed.
3. Remove protective white wrapping, tape,
and other packing materials and discard.
4. Remove any foreign materials from the
interior of the machine.