Installation guide – Moyer Diebel MD1000HT User Manual
Page 35
29
_________________ Installation Guide
;
Electrical Connection MD-1000LT
1. Locate the control cabinet keys on the rear of the control cabinet.
2. Remove 1 key to unlock the cabinet; do not remove the other key.
3. Unlock the control cabinet and remove the cover.
4. Locate the power cord on the left rear side of the control cabinet.
5. Locate the Machine Electrical Connection Data Plate mounted near the terminal block.
6. Check the power cord terminal connections at the main terminal board.
Warning:
Disconnect the main electric supply and place a tag at the fuse or disconnect switch
indicating that work is being performed on that circuit.
Warning:
The dishwasher must be electrically grounded according to all local codes
and regulations governing the installation of electrical service.
The
MACHINE ELECTRICAL CONNECTION DATA PLATE
is the certified authority for the
dishwasher power requirements.
DO NOT
use electrical data from any other source
unless an authorized factory representative instructs you to use other data.
Machine Electrical
Connection Data Plate
Main terminal block
MD-1000LT • Electrical Connection