Moyer Diebel MD1000HT - Manual (Page 22)

16
5. Check that the following utilities are connected:
to the dishwasher and ready for use:
;
Electrical service
;
Hot water supply
;
Drain
;
Ventilation (if required by local regulations).
6. Check the chemical connections and chemical containers to
ensure that enough chemical supplies are available.
7. Turn on the water supply to the dishwasher.
8. Turn on the main power switch at the service disconnect switch.
9. Open the dishwasher doors fully.
10. Check upper and lower spray arms are in place and spin freely.
11. Check that the drain-overflow and pump screen are in place.
12. Check that the lower scrap screen is clean and in place.
Installation Guide _____________
;
Initial Start-up MD-1000HT
MD-1000HT • Initial Start-up
Continued from page 15
11b 11a 10