Meyer Sound 616 - Manual (Page 38)

CHAPTER 4: USING THE GALILEO FRONT PANEL
38
■ Cancel Button: Pressing the Cancel button will discard the naming changes and return to
the previous screen.
TIP: The fastest way to enter names is to use a combination of the rotary knobs
and the Up and Down arrows. Use the Arrow buttons to go to the desired row,
and then use the Blue knob to highlight and select the desired letters. Create spaces
with the Red knob, and correct errors or add words in the middle with the Green knob.
ARRAY CORRECTION
Press the Enter button or the Blue knob from the Galileo Map to enter Array Correction. Up to
eight arrays may be designated that can receive low/low-mid frequency correction. Each can
be labeled, selected by system type and quantity, have outputs chosen, and enabled or
bypassed. Scroll through and highlight the selections using the Up and Down arrows. Avail-
able fields and their navigation are:
■ Array: Use the Left and Right arrows or the Blue knob to select from arrays #1–#8.
NOTE: In the Array Correction screen, the Left and Right arrows always affect
the array number unless the Outputs field is highlighted.
■ Label: Press the Enter button or the Blue knob to bring up the naming utility; use the rotary
knobs and Arrow buttons to create the label, and press Menu button to accept.
■ Status: Press the Enter button or turn the Blue knob to toggle between Bypassed and
Enabled; Bypassed is the default.
Array Correction Page