Meyer Sound 616 - Manual (Page 53)

GALILEO 616 USER GUIDE
53
Equalization Edit Menu
Use the Up and Down arrows, and press the Enter button to select from the following sub-
menu items:
■ Copy Parametric/TruShaping/High/Low Pass: Highlight this item and press the Enter
button to copy the present equalization settings on the page; use the following command
to paste them into another channel.
NOTE: When in Cursor mode, a Copy All function appears in the Edit submenu,
allowing all of the values in the selected channel to be copied. After copying, a
Paste All function is also provided. If multiple channels are selected when using the
above functions, the pasted values will be placed in all of the selected channels.
■ Paste Parametric / TruShaping / High/Low Pass: After going to the page of another
channel, highlight this item and press the Enter button to paste the copied equalization
settings.
NOTE: Once a set of equalization values are copied, they may be pasted into as
many channels as desired, one channel at a time, and may be pasted into any of
the EQ type pages (for example, Paste Parametric may be used in a TruShaping or
High/Low Pass page). Press the Channel Select button for the desired channel on the
Galileo front panel to go to that channel’s page, and paste in the EQ values, or navigate
to the other channels by pressing the Cancel button twice, until the Input Processing or
Output Processing Overview page is reached, and then scroll down to the desired
channel and press the Enter button to select. Alternately, use the Input/Output menu
described below to select the next channel.
Equalization Edit Menu