Meyer Sound 616 - Manual (Page 57)

GALILEO 616 USER GUIDE
57
USING TRUSHAPING EQ
When TruShaping EQ is selected in the Input or Output Processing pages, one EQ point is
presented at a time on the page. These points are nominally centered at 125 Hz, 500 Hz, and
4 kHz, though once their frequency has been changed for one channel using the Blue knob,
the new value replaces these values for that Galileo project.
Press the Left and Right arrows or press or turn the Green knob to select among the TruShap-
ing EQ points. The selected band and upper or lower EQ point will flash, and any frequency
and gain changes made will affect that point and band. The bands are:
■ Low Shelving: Left-most part of frequency line and dot are flashing; the Blue knob moves
frequency and Red knob changes gain.
TruShaping EQ with EQ Point
TruShaping EQ with Equalization Changes