Meyer Sound 616 - Manual (Page 39)

GALILEO 616 USER GUIDE
39
■ Type: Press the Enter Button or turn the Blue knob to scroll among the available
M Series loudspeaker types (M1D, M2D, MILO, M3D, MICA, M’elodie); the Enter button
continually scrolls through the selections, while the Blue knob goes from M1D at counter-
clockwise to M’elodie at clockwise.
■ Size: Use the Blue knob to scroll through the values from 1 to 24 loudspeakers, with 1 at
counterclockwise and 24 at clockwise.
■ Outputs: Use the Blue knob to scroll through and place a blinking box cursor over the out-
put; press the Blue knob to select it, after which it will be highlighted. A selected output
can be deselected by highlighting it and pressing the Blue knob again. Alternately, the Left
and Right arrows can scroll through the available outputs, and the Enter button will select
and highlight or deselect outputs to be affected by the Array Correction.
LINK GROUPS
The Link Groups page allows a set of input or output channels to be selected so that actions
done to one channel will be done to all members of the same group. The group can be
enabled or disabled; when disabled, changes made to one channel will not be duplicated in
the others. An input or output channel can belong only to one Link Group.
CAUTION: Since an input or output channel can only belong to one Link Group,
selecting a channel that is currently assigned to another Link Group will remove it
from the original group and add it to the new one.
Link Groups Page
!