Meyer Sound 616 User Manual
Page 42
CHAPTER 4: USING THE GALILEO FRONT PANEL
42
■
Input / Output Masters: Cursor goes to the fader for that channel, allowing gain changes
with the Red knob or Arrow buttons.
■
Summing Matrix: Cursor goes to the particular input/output combination that is selected,
allowing routing selection with the Enter button or level control with the Red knob.
■
EQ Mode Graphs (including Numeric tables): Goes to the graph and the particular mode
that was last selected.
■
Other Pages: Cursor goes to the main Processing page for the selected input or output
channel.
TIP:
When adjusting EQ parameters, holding the Menu button and pressing the
Up and Down arrows will toggle through the channels, while pressing the Left and
Right arrows will toggle through the EQ modes (types) within the currently selected
channel. The Enter button bypasses individual parametric EQ bands, and the TruShap-
ing or Low/High Pass equalization when in the graph or numeric EQ pages.
TIP:
Press and hold a Select button, and then press additional ones to select mul-
tiple channels for temporary “linking.” Actions done with one of these channels
will simultaneously occur on all the selected channels (other than atmospheric correc-
tion). To unlink the channels, press any Select button.