Meyer Sound 616 - Manual (Page 40)

CHAPTER 4: USING THE GALILEO FRONT PANEL
40
The Link Group fields are:
■ Group: Use the Up and Down arrows to highlight, and the Left and Right arrows or the
Blue knob to scroll through and select group #1 through #8; both methods do a continu-
ous scroll.
NOTE: In the Link Groups screen, the Left and Right arrows always affect the
group number, regardless of which field is highlighted, unless the Inputs or Out-
puts field is highlighted.
■ Label: Enter a name with the same method as other label fields.
■ Status: Use the Up and Down arrows to highlight, and the Enter button or Blue knob
(either push or rotate) to toggle between Disabled or Enabled.
■ Inputs or Outputs: Use the Up and Down arrows to highlight, and then use Left and Right
arrows or Blue knob to scroll among input or output channels to link. Press the Enter but-
ton or the Blue knob to select each one, which will remain highlighted; click again to dese-
lect.
NOTE: When channels are linked and one of them is selected using the Select
buttons on the Galileo front panel, all of the blue LEDs within the group light, and
the screen typically goes to the main Processing window for the channel that was
selected. The name of the channel in the upper right corner is highlighted and flashing,
indicating that it is linked. Any change made for this one channel in the processing win-
Link Groups Page (with Linked Output Channels Highlighted)