Meyer Sound 616 - Manual (Page 41)

GALILEO 616 USER GUIDE
41
dow will also happen in the other linked channels. To view the other channels in the
group, press the Select button corresponding to that channel and it will appear in the
display, and will show that channel number in the upper right corner.
NOTE: Atmospheric Correction cannot be part of a link group.
NOTE: To unlink the group of channels, go to Link Groups from the main menu,
scroll to highlight the Status field, and click the Enter button (or turn or press the
Blue knob) to select Disabled. Clicking on any of the Select buttons will then turn on
only that LED, and turn off the lighted group.
TIP: To remove an input or output channel from a Link Group, select the appropri-
ate group, scroll down to Inputs or Outputs and across to the highlighted channel,
and press the Enter button or the Blue knob to remove the highlight.
NAVIGATING WITH THE SELECT BUTTONS
The input and output Select buttons interact with the display screen to quickly access any of
the channels. When they are selected and active, the blue LED corresponding with that chan-
nel will light.
Depending on which type of parameter is active on the display, pressing a channel Select but-
ton will function in the following way:
Galileo 616 Front Panel with Select LEDs Showing Linked Channels