Motorola CAJUN P120 - Manual (Page 34)

Chapter 4 Installation and Setup
20 Cajun P120 User’s Guide
Configuring the Switch
The configuration of the Cajun P120 and its port settings may be performed from a
text-based utility, from the stand-alone Cajun P120 Manager or from CajunView.
For instructions on the text-based utility, see the “Command Line Interface”
chapter.
For instructions on the graphical user interfaces, refer to the “Cajun P120 Manager”
Appendix and the Manager User’s Guide on the Management CD.
Cajun P120 Default Settings
The default settings for the Cajun P120 switch and its ports are determined by the
Cajun P120 software and might change in newer versions of the Cajun P120
software. See the Release Notes for the most up-to-date default settings.
Switch Settings
Table 4.1 Default Switch Settings
Function Default Setting
Cajun P120 IP Address 149.49.32.134
Bootp Mode Never
Default Gateway 0.0.0.0
SLIP Address 192.168.10.1
Management PC SLIP Address 192.168.10.2
VLANs VLAN 1
Spanning Tree Enabled
(Disabled in
Version 1.0)
TFTP Mode Limited
TFTP Server 0.0.0.0
TFTP File Name p120.lst
Address Aging (CAM) Enabled