Motorola CAJUN P120 - Manual (Page 61)

Chapter 6 Legacy CLI (Command Line Interface)
Cajun P120 User’s Guide 47
For example, to view port settings for all the ports, type the following command:
CajunP120> shport
Note: The total number of ports displayed is 24 for the Cajun P120 plus those in
the expansion module.
Using the VLANTAB Command
The vlantab command displays a table containing the port type, and VLAN# for
the ports.
To display the port table type the following:
CajunP120> vlantab
port#| Admin| Duplex| Link| Speed| FC mode| Redundant
------ ------- ------- ----- ------- -------- ----------
1 ena half up 10 Mbps dis none
2 ena half up 10 Mbps dis none
3 ena half up 10 Mbps dis none
4 dis half down 10 Mbps dis none
5 ena half down 10 Mbps dis none
6 ena half up 10 Mbps dis none
7 ena half up 10 Mbps ena none
8 ena half up 10 Mbps dis none
... ... ... ... ... ... ...
32* ena auto down auto dis none
port#| Port Type| Vlan#
--------- ---------------- --------------
1 no-Tagging 1
2 no-Tagging 1
3 no-Tagging 1
.
.
. .
.
. .
.
.