Motorola CAJUN P120 - Manual (Page 45)

Cajun P120 User’s Guide 31
Chapter 6
Legacy CLI (Command Line Interface)
This chapter provides instructions for the configuration of your Cajun P120 using
the text-based Legacy CLI (Command Line Interface or Terminal Emulation).
The configuration procedure involves either establishing a Telnet session or a serial
connection and then using the Cajun P120’s internal CLI (see Chapter 5,
Introduction to the Command Line Interfaces). The CLI is command-line driven
and does not have any menus. You type the desired command at the prompt and
press Enter.
If you are configuring your Cajun P120 for the first time we suggest that you use
the simple-setup command. This command provides you with a selection of all the
relevant parameters that need to be configured initially.