Marathon MAGNUM ROUTER User Manual
Page 142
Chapter 9: Sample Configurations
___________________________________________________________________
9-37
Magnum B (Remote)
Microband VoIP Configuration
In order to successfully configure MVoIP, you will need two IP addresses on the same subnet:
one is for the Ethernet (E1) interface and one is for MVoIP driver (also referred to as the
“source” address). In this example, the IP addresses to be used are as follows:
Magnum A: (Host)
E1 IP address: 66.67.68.250 / 24
MVoIP address: 66.67.68.251 / 24
Magnum B:
E1 IP address: 172.16.1.250 / 24
MVoIP address: 172.16.1.251 / 24
Although the Magnum A IP addresses are from the public Internet, MVoIP can also run over
private networks behind a firewall, thru a VPN Tunnel and even wireless systems. In all cases,
it is a requirement that 2 IP address of the same subnet be supplied.
The following windows illustrate the MVoIP Configuration associated with this sample
configuration: