Marathon MAGNUM ROUTER - Manual (Page 32)

Chapter 6: Logging Onto a Magnum Router
___________________________________________________________________
6-5
Console Login
The default for logging onto a Magnum Router is a serial connection from the PC that is running
the Magnum Router Manager software to a Magnum Router card. The connection is
accomplished by connecting either the supplied DB-9 to DB-25 straight thru cable (or
equivalent) from the PC to the Magnum.
The settings for serial communication with a Magnum Router is 9600 Baud, 8 bits, No Parity
and 1 stop bit (commonly referred to as 9600,n,8,1) and cannot be changed.
As can be seen in the above screen, Console is already selected as the Login Method. Click
on the Connect button to begin the login process.