Marathon MAGNUM ROUTER - Manual (Page 47)

Chapter 7: Magnum Router GUI Manager
___________________________________________________________________
7-2
Magnum Router Manager Main Screen
Menu Bar
Toolbar
Magnum Name.
Display's the name assigned to the
Magnum Router that the Manager is
currently logged into
Remote Access.
This ONLY shows when a Magnum
Router is being remotely accessed.
Transmit Data.
Flashes RED when data is sent.
Receive Data.
Flashes RED when data is received
Connection Status
Green Up Arrow = Connected to a Magnum
Router
RED Down Arrow= Not Connected
Connection Type.
Display's how the Magnum Router
Manager is connected to a Magnum
Router
Figure 13 - Magnum Manager Main Screen
The Magnum Router Manager screen is broken into 3 sections. The Menu Bar, the Toolbar and
the Status bar. Each of these sections are covered in detail throughout this chapter.
Toolbar Buttons
Figure 14 - Main Screen Toolbar
The Toolbar buttons are displayed below the Menu Bar and consist of seven command buttons,
which correspond to the seven primary steps to program the Magnum Router. Each of these
buttons can be accessed by clicking on them, using their shortcut key or by selecting the option
in the appropriate menu item (as described above).