Marathon MAGNUM ROUTER - Manual (Page 34)

Chapter 6: Logging Onto a Magnum Router
___________________________________________________________________
6-7
Micom Marathon Matrix
This gives the ability to connect to the Magnum Router’s console port via a Micom Marathon
matrix connection. This connection is done by a NODE/CHANNEL connection type.
Bypass the LOGIN
Process and go directly
to the Magnum Router
Manager Main Screen
Connect to a Magnum
Router using the
selected LOGIN
METHOD
Start the TEXT ONLY
terminal program
Enter the Marathon
NODE name and the
channel to be used to
connect to the Magnum
Router Console port,
and the Marathon
Password if one is
necessary
Figure 10 - Micom Marathon Matrix Login Screen
Enter the Micom Marathon node name and channel that is to be used to connect from the
Marathon to the Magnum and then click on Connect.
It is very important that the Marathon Async channel that is to be
used is configured properly. Refer to chapter 12 for further
information.
Failure to configure the second Async port can cause the Magnum
Router’s console port to stop functioning, thus requiring a reboot.