Marathon MAGNUM ROUTER - Manual (Page 148)

Chapter 10: Magnum Router Troubleshooting
___________________________________________________________________
10-1
Chapter 10: Magnum Router Troubleshooting
LED Display Indicators
The LED display indicators are found on the front of the module and are viewable from the front
side of the Marathon base unit chassis. The LED messages are displayed in the table below:
LED Color Meaning
OK Red Unit is successfully installed in the Marathon base unit chassis
OK Off
Magnum Router module is NOT installed properly (power down and check to
ensure the module is "seated" properly in the Marathon module stack)
LK Green
Magnum 10/100 Base-T UTP Ethernet port is successfully plugged into a
local LAN switch or hub port
LK Red
Magnum 10/100 Base-T UTP Ethernet port is NOT successful plugged into a
local LAN switch or hub port (double check that you have used the patch
cord / LAN cable provided p/n M5000C/CAT5E and that you have a known
good switch/hub port
W3 Green WAN port is up and operational
W2
W1
W3 Red WAN port is NOT up or operational
W2
W1
M1 Green
M1 Magnum to A1 Marathon link is successfully programmed and
operational
M1 Red M1 Magnum to A1 Marathon link is not up or operational.