Marathon MAGNUM ROUTER - Manual (Page 67)

Chapter 7: Magnum Router GUI Manager
___________________________________________________________________
7-22
It is at this time that the Send Config can be canceled by clicking No and going back to the
appropriate section of the Magnum Router Manager and applying any fixes necessary, or this
warning can be ignored by pressing Yes.
If Yes was selected, the following screen will appear:
Click Send to send this configuration to the Magnum Router, or click Cancel to return to the
Magnum Router main screen.
If Send was selected, the message bar on the screen will send informational messages to
inform the user of the current status of the configuration being sent.
When the configuration send has completed, the Magnum Router main screen will be shown.
Reboot the Magnum Router
Select this button to activate a new configuration on the Magnum Router.
This can also be accessed by pressing ALT-R, and is also available as Reboot Router from the
System menu.
The Reboot Router button will ONLY be available if the Magnum Router Manager is
logged onto a Magnum Router.
The final step in the configuration process is to reboot the Magnum Router. The previously sent
configuration has not been activated. A configuration on the Magnum Router is activated only
when the unit is powered-up or rebooted.