Intermec PX4I - Manual (Page 100)

&BTZ$ PEFS

19J
3 4
6 5
86 EasyCoder PX4i User’s Guide (IPL version)
Chapter 10 — Maintenance
Printhead Replacement, cont.
Remove any media and transfer ribbon.
Pull the printhead bracket away from
the magnet in the pressure arm.
Disconnect the hooked printhead
bracket fi ngers from the shaft and pull
out the printhead as far as the cables
allow. Disconnect the cables from the print-
head. Note the snap-lock on the inner
connector. Pull at the connectors—not
at the cables!