Intermec PX4I User Manual
Page 75
Advertising
SETUP:
SER-COM
SETUP:
CONFIGURATION
SETUP:
MEDIA
SETUP:
TEST/SERVICE
SETUP:
NETWORK
Option
Starting point
EasyCoder PX4i User’s Guide (IPL version)
61
Chapter 7 — Setup Mode
The Setup Mode is organized as an endless loop, from which you can
select a number of sub-categories. At startup, the fi rmware determines if
an EasyLAN interface board is installed in the printer. If so, the Network
setup menus are shown in the Setup Mode.
The diagram below shows the options in the main loop. Detailed over-
views are shown on the pages that follow.
Advertising