Internal batch takeup (roll-to-roll) – Intermec PX4I User Manual
Page 46
32
EasyCoder PX4i User’s Guide (IPL version)
Chapter 4 — Media Load
Internal Batch Takeup (Roll-to-roll)
The EasyCoder PX4i can print on labels, tickets, tags, and continuous
stock in various forms. This chapter describes the case when printed
labels fi tted on liner (backing paper) or pre-perforated tickets and tags
are wound up inside the printer. The roll of printed labels, tickets, or tags
can then be removed and be handled manually. This requires an optional
internal liner/batch takeup unit.
The takeup hub can accommodate 30 to 40% of a full-size media roll.
Internal batch takeup can be used for:
• Self-adhesive labels fi tted on liner
• Pre-perforated tickets with gaps
• Pre-perforated tickets with marks
Note: Save the label indicating the sensitivity number attached
to the media roll. You will need this number to set the media
sensitivity, see Appendix D.