Intermec PX4I - Manual (Page 74)

60 EasyCoder PX4i User’s Guide (IPL version)
Chapter 7 — Setup Mode
Navigating in Setup Mode
Enter the Setup Mode by pressing the <Setup> key on the printer’s front
panel. While going through the setup procedure, you are guided by texts
in the printer’s display. You can navigate between setup menus, acknowl-
edge displayed values, select or enter new values, etc. by using the keys
on the printer’s keyboard.
Move up one level and escape without changing the setting.
Move one step back on the same level.
Exit the Setup Mode. Can be used anywhere in Setup Mode.
Acknowledge and move to next menu.
Move down one level.
Move forward on the same level.