Intermec PX4I - Manual (Page 77)

PARITY:
BOOTP
PARITY:
DHCP
PARITY:
MANUAL
SETUP:
NETWORK
NETWORK:
IP SELECTION NETWORK:
IP ADDRESS NETWORK:
NETMASK NETWORK:
DEFAULT ROUTER NETWORK:
NAMESERVER
IP SELECTION:
DHCP+BOOTP IP ADDRESS:
0.0.0.0 NETMASK:
0.0.0.0 DEFAULT ROUTER:
0.0.0.0 NAMESERVER:
0.0.0.0
NETWORK:
MAC ADDRESS
MAC ADDRESS:
nnnnnnnnnnnn
Read-only Read-only Read-only Read-only Read-only
These menus will only be displayed when an optional EasyLAN interface board is installed.
EasyCoder PX4i User’s Guide (IPL version) 63
Chapter 7 — Setup Mode
Setup Mode; Network (option)
(IPL v2.30)