Intermec PX4I - Manual (Page 85)

EasyCoder PX4i User’s Guide (IPL version) 71
Chapter 8 — Options
Label Taken Sensor
The Label Taken Sensor (LTS) is a photoelectric sensor fi tted to the
center section inside the front door. It allows the printer’s fi rmware to
detect if the latest printed label, ticket, tag etc. has been removed before
printing another copy.
The label taken sensor is usually factory-fi tted, but is also available as a
kit for installation by an authorized service technician. It cannot be fi tted
in combination with a paper cutter.
Interface Boards
A number of interface boards are available for use with the EasyCoder
PX4i printer. The interface boards are either factory-fi tted or can easily
be fi tted by an authorized service technician.
The EasyCoder PX4i can accommodate one EasyLAN interface board
plus one other interface board.
EasyLAN boards:
• EasyLAN Ethernet interface
• EasyLAN Wireless interface
Other communication boards:
• Parallel Interface Board (IEEE 1284)