IBM EGX-400 - Manual (Page 120)

116 Chapter 6 - Detailed Description of Functions
6-4. Detailed Description of the Menus
Copy Menu
Copy
[START, BUF-CLEAR]
This feature repeats the same cutting. Executing [START] repeats exactly the same operation as the very last cutting operation.
Commands sent from the computer are temporarily stored in the machine. (The place where they are stored is called a buffer
memory.) This features retrieves the commands in the buffer and executes them again. Note that the execution of sequences by the
teaching feature cannot be repeated.
The buffer stores one set of data sent from the computer. When you send one set of data from the computer, then later send a
second set, the first set of data is deleted and only the second set remains. When you are performing cutting while the machine is
receiving data from the computer, using the pause menu to quit cutting causes the data in the process of being received to be
deleted without being stored. Also, you cannot repeat operations using data whose size exceeds the capacity of the buffer. Stored
data is lost when you switch off the machine.
Executing [BUF-CLEAR] deletes stored data.
Language Menu
Select language
Saved Yes
Setting ENGLISH, JAPANESE
Default ENGLISH
This selects the language used for the display. To display this menu, hold down the [MENU] button and turn on the power.
Initialize Menu
Initialize
This initializes all settings made using the menus, returning them to their factory-default values. To perform initialization, hold
down the [ENTER/PAUSE] button as you switch on the power. Continue holding down the [ENTER/PAUSE] button for at least
one second.