IBM EGX-400 - Manual (Page 33)

29 Chapter 2 - Basic Operation
2-4. Starting and Stopping Spindle Rotation
Forced Stop of Spindle Rotation
With this machine, you can set whether or not the spindle rotates. When it is set to rotate, rotation automatically starts
when a command is received from the computer and stops when cutting ends. When set not to rotate, no rotation at all
takes place. (Rotation does not occur even if you press
.)
You use this feature at times such as when you are performing scribing using a diamond scraper.
Making the Setting for Spindle Rotation
1 Press until the screen shown at right
appears.
2 Press .
The blinking cursor moves to [OTHERS].
3 Press .
The screen for setting spindle rotation appears.
4 Use to move the blinking cursor to
[ON] or [OFF]. Press .
[ON] makes the setting for rotation, and [OFF] makes
the setting for forced stop.
I /O OTHERS
TEACHING SELF
REVOLUTION
<ON> OFF
I/O O THERS
TEACHING SELF