InFocus IN82 - Manual (Page 19)

18
Optimizing video images
Your projector has been factory optimized for excellent performance no matter
what the source. However, if you wish to make further changes you can optimize
the image using onscreen menus. For general information on using the menus, see
page 19.
• Adjust the Keystone, Contrast, Brightness, Color, or Tint in the Picture menu
(page 20).
• Select a Sharpness setting (page 22).
• Use the Color Control to adjust the color gain and offset (page 23).
• Adjust the Color Temperature. Select a listed value (page 23).
• Turn on Overscan to remove noise on the edges of the video image (page 21).
• Change the Aspect ratio (page 20). Aspect ratio is the ratio of the image
width to image height. TV screens are usually 1.33:1, also known as 4:3.
HDTV and most DVDs are 1.78:1, or 16:9 (the projector’s default). Choose
the option that best fits your input source in the menus, or press the Resize
button on the remote to cycle through the options. See page 17.
• Select a specific Color Space. See page 22.
• Select a different Video Standard. Auto tries to determine the standard of the
incoming video. Select a different standard if necessary. See page 23.
• Make sure your DVD player is set for a 16:9 television. See your DVD player’s
user’s guide for instructions.
Customizing the projector
You can customize the projector for your specific setup and needs. See page 24 to
page 26 for details on these features.
• For rear projection, turn rear mode on in the Settings>System menu.
• For ceiling mounted projection, the projector has an Auto Ceiling feature to
invert the image (Settings>System menu).
• Turn the projector’s display messages on and off.
• Turn on power saving features.
• Specify blank screen colors and start up logos.
• Specify the language viewed on the menus.
• Save settings for the active source as a preset.
K1 RG.fm Page 18 Thursday, September 27, 2007 10:24 AM