InFocus IN82 - Manual (Page 23)

22
Advanced menu
Remember that not all options in the menus are available for all sources/signals.
Iris: adjusts the aperture of the iris from 0 to 100 (fully open) to regulate the
amount of light emitting from the projector. Close the aperture to increase the
contrast in dark images.
Phase: adjusts the horizontal phase of a computer source.
Tracking: adjusts the vertical scan of a computer source.
Horizontal/Vertical Position: adjusts the position of a computer source.
Sync Threshold Adjust: (progressive signals only) If a hardware device, such as a
DVD player, is not syncing properly with the projector, adjust this option to help it
to sync when connected to the projector.
Flesh Tone Correction: this modifies colors to make the skin complexion bet-
ter.
Black Level Calibration: Automatically adjusts brightness to get the best black
level. Before using, make sure there are black bars at the top, bottom, or sides of
the image.
Film Mode: controls deinterlacing and is On by default. When checked, it
assumes the incoming signal is film material and optimizes the image accordingly.
Sharpness: (video sources only) changes the clarity of the edges of a video image.
Select a sharpness setting.
Color Space: This option applies to computer and component video sources. It
allows you to select a color space that has been specifically tuned for the input sig-
nal. When Auto is selected, the projector automatically determines the standard.
To choose a different setting, turn off Auto, then choose RGB for computer
sources, choose either REC709 or REC601 for component video sources.
Advanced menu
Sharpness
Color Space
K1 RG.fm Page 22 Thursday, September 27, 2007 10:24 AM