InFocus IN82 - Manual (Page 26)

25
Display Messages: displays status messages (such as “Searching”) in the lower-
left corner of the screen.Translucent OSD (On Screen Display): makes the
menus translucent. This prevents the image from being completely covered by the
menus while you are making image adjustments. Sleep Timer: automatically turns
off the projector after 4 hours. Power Save: automatically turns the lamp off after
no signals are detected for 20 minutes. After 10 additional minutes with no signal,
the projector powers down. If an active signal is received before the projector
powers down, the image is displayed.
Startup Logo: allows you to display a blank screen instead of the default screen
at startup.
Blank Screen: determines what color is displayed when you select Blank Screen
in the Startup Logo menu and when no source is displayed.
Language: allows you to select a language for the onscreen display.
Custom key: allows you to assign a different function to the Custom key on the
remote, allowing you to quickly and easily use that function. Highlight an effect and
press Select to choose a different one.
• Blank Screen: displays a solid blank image.
• Freeze: takes a snapshot of the projected image. If you’re watching video, the
source video continues to run but the image is frozen.
• Source Info: the default effect. It opens a window with projector and source
information.
• Service Info: opens the Service info window.
• Source 4: selects source 4 (by default, Source 4 is the Composite input). This
gives you 4 direct source options on the remote. See page 24.
Startup Logo Blank Screen
Language menu
Custom Key
K1 RG.fm Page 25 Thursday, September 27, 2007 10:24 AM