InFocus IN82 - Manual (Page 22)

21
Presets: This allows you to customize settings and save the settings to be
restored later. To restore the factory default settings, choose Factory Reset in the
Settings>Service menu.
To set a preset for the current source, adjust the image, select Save Settings in
the Presets menu, then choose Save User 1, 2, or 3. You can recall these settings in
the future by selecting the appropriate user presets. All settings in the Picture
menu (except Keystone) are saved and recalled. ISF Day and ISF Night settings
support certified Imaging Science Inc. calibration. ISF presets are not available until
after calibration is performed, and picture settings cannot be adjusted when ISF
presets are active. For more information go to www.infocus.com/service.
BrilliantColor™: produces an expanded on-screen color spectrum that delivers
enhanced color saturation for bright, true-to-life images. This feature is off by
default.
Gamma: Gamma tables contain preset intensity configurations optimized for the
input source. You can select a gamma table that has been specifically tuned for
either film, CRT (Cathode Ray Tube), video, PC, or Bright Room input. (Film input
is material originally captured on a film camera, like a movie; video input is material
originally captured on a video camera, like a TV show or sporting event.)
NOTE: Your viewing preferences may vary. Cycle through the gamma options and
pick the one you like the best.
Overscan: removes noise around the edges of the video image. Select Zoom to
remove the outer 3% of the image and scale the image back up to its original size.
Select Crop to remove the outer 3% of the image without rescaling the image.
Presets
Save
User
Settings
Gamma
Overscan
K1 RG.fm Page 21 Thursday, September 27, 2007 10:24 AM