InFocus IN82 - Manual (Page 20)

19
Using the menus
To open the menus, press the Menu button on the remote. (The menus automat-
ically close after 60 seconds if no buttons are pressed.) The Main menu appears.
Use the arrow buttons to move up and down to highlight the desired submenu,
then press the Select button.
To change a menu setting, highlight it, press Select, then use the up and down
arrow buttons to adjust the value, select an option using radio buttons, or turn the
feature on or off using check boxes. Press Select to confirm your changes. Use
the arrows to navigate to another setting. When your adjustments are complete,
navigate to Previous or Exit, then press Select to go to the previous menu; press
the Menu button at any time to close the menus.
Dots appear before the menu name. The number of dots indicate menu’s level,
ranging from one (the Main menu) to four (the most nested menus).
The menus are grouped by usage:
• The Picture menu provides image adjustments.
• The Settings menu provides set-up type adjustments that are not changed
often.
• The Source Info menu provides a read-only display of information about the
projector and source.
Certain menu items may not be visible or may be grayed depending upon a partic-
ular source being connected. Differences are also seen in analog versus digital
video sources and interlaced versus progressive sources.
Menu options are grayed out only if the source is selected but no signal is present.
For example, if the projector is set to a video source but the source, such as a
DVD player, is turned off video menu options are grayed out.
remote navigation
Main menu
buttons
Picture
Settings
menu
menu
dots
Source Info menu
K1 RG.fm Page 19 Thursday, September 27, 2007 10:24 AM