Integra DTR-6.4/5.4 - Manual (Page 30)

30
Setup Menu
When making the various settings required to configure your DTR-6.4/5.4 for optimum performance, you can either use the OSD Menu that
appears on your television monitor or you can use the display on the front of the DTR-6.4/5.4. The OSD Menu is a settings menu that is
displayed on your TV monitor. For your reference when performing the setting procedures, this manual shows both the OSD Menu displayed
on your television monitor and the display on the front of the DTR-6.4/5.4.
* Menu *****************
1.Hardware Config
2.Speaker Config
3.Speaker Distance
4.Level Calibration
5.Input Setup
6.Preference
5.Input Setup
****Input:DVD *******
a.Digital Input :OPT1
b.Component Video
:Input1
c.IntelliVolume
: 0dB
Quit:|SETUP|
5.Input Setup
****Input:DVD *******
d.Analog/PCM/D.F.2ch
:Last Valid
e.PCM fs=96k
:Last Valid
f.D.F. :Last Valid
g.D.F.Mono:Last Valid
Quit:|SETUP|
5.Input Setup
****Input:DVD *******
h.12V Trigger A :On
i.12V Trigger B :Off
Quit:|SETUP|
|ENTER|Quit:|SETUP|
32
33
52,54
53,55
34
34
56
57
58
Configuring the
initial settings
Making the
optimum
settings