Integra DTR-6.4/5.4 - Manual (Page 56)

56
Input Setup
-- / ---
1 2 3
4 5 6
+10 0
7 8 9
Audio Sel Muting
Angle Subtitle TV / VCR
Random Audio Adjust
Enter
Search
Input Selector
Dimmer Zone 2 Display
SURR THX
Stereo Direct
All ST
VOL C H
Disc
Pure A
Rec
DSP DSP Re-EQ
Level
A M
V 1
DVD
V 3 V 4 V 5
C D
V 2
P H
TAP TUN
RC-534M
Setup
Return
/ / /
Return Setup
/ / /
ENTER
Input Selector
buttons
Input source buttons
This setting allows you to adjust for the volume differences between
your various input source components.
When switching input sources, you may find that the output level
for different components or input sources connected to the DTR-
6.4/5.4 is different even though the main volume setting is the same.
Under normal circumstances, you would then have to change the
volume setting each time you change the input source. This Intelli
Volume setting allows you to preset a volume level for each input
source separately so that when you do switch from one input source
to another, the DTR-6.4/5.4 adjusts the volume accordingly and the
volume stays the same.
1. Select the desired input source.
2. Press the Setup button on the front panel or on the
remote controller to display the main menu on the
monitor and the front display.
The main menu appears.
Adjusting the volume differences between
components (Intelligent Volume)
* Menu *****************
1.Hardware Config
2.Speaker Config
3.Speaker Distance
4.Level Calibration
5.Input Setup
6.Preference
|ENTER|Quit:|SETUP|
3. Use the and cursor buttons to select “5. Input
Setup” and then press the ENTER button.
The “Input Setup” menu appears.
4. Use the and cursor buttons to select “c.
IntelliVolume” and then use the and cursor
buttons to set the desired value.
If the volume is quieter than that of other sources, increase it
with the cursor button, and if it is louder than that of other
sources, decrease it with the cursor button.
The IntelliVolume can be adjusted between –12 and +12
decibels.
5. Press the Return button to return to the main menu.
Press the Setup button on the front panel or Setup button on the
remote controller to exit the Setup menu.
* Menu *****************
1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Input Setup
5.OSD Setup
6.Preference
5.Input Setup
****Input:DVD *******
a.Digital Input :OPT1
b.Component Video
:Input1
c.IntelliVolume
: 0dB
Quit:|SETUP|